Guillows Javelin Balsa Model Build Project. By James Packwood
[wpdevart_youtube]dmjCIy5GM1M[/wpdevart_youtube]
If your looking for a build project to do for yourself or with your family this will be a good project to start with. You can pretty much have fun with any of the Guillows models. It is simple and fun and does not cost a a lot of money. you can build this kit as a static display or as a flyable model. Here is a list of the items you will need to assemble the Guillows Javelin.
My R/C Center Build project. the Guillows Javelin .
- xacto knife with a sharp blade.
- Waxed paper to cover the plans.
- Building Board (A ceiling tile will do. that is what I use).
- T pins or straight pins (the T Pin is best).
- Pliers to bend the wire for the landing gear.
- Glue – I use CA glue (thin and medium) you can also use the Testors wood glue (takes a little while to set).
- A small square and small clamps to make sure the parts are straight and square.
- Use a glue stick to apply the tissue. This avoids the smell of regular model dope and it is quicker to dry.
- A mixture of half and half water and alcohol in a spray bottle to shrink the tissue.
- A can of clear coat spray to help protect the tissue on your model.
The plans are fairly simple to follow and it does not require a lot expense. After building your kit I would suggest you locate a local indoor group to get some tips on balancing and flying your model. Make new friends and have some quality time with your family.
Happy Building.
James Packwood
